Neuspeed 25.02.28.3 Manuel d'utilisateur télécharger pdf

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com

28mm RACE SERIES TUBULAR REAR ANTI-ROLL BAR – PART #25.02.28.3

FITS: 2006-up AUDI A3(8P) FWD, 2008-09 AUDI TT(8J) FWD

2005-up VOLKSWAGEN GTI, GLI & SPORTWAGEN MKV/VI, Jetta V, 2006-up Passat(B6) FWD, 2007-up EOS, 2007-09 Rabbit, 2009-up CC FWD, 2010-up Golf VI &

2011-12 TIGUAN FWD

PARTS LIST: 1 - Tubular Anti-Roll Bar 1 - Right Support Bracket TOOLS REQUIRED: 1 - RATCHET WRENCH 1 - 9/16” WRENCH

1 – Silicone Grease 2 - M6 Nutsert 1 - 10 MM SOCKET 1 - 17mm WRENCH

2 – Urethane Bushing 2 - M10 Lock Nuts 1 - 13mm WRENCH 1 - 16mm WRENCH

1 - M6 Nutsert Tool 2 - M6 x 16mm Flange Bolt 1 - M10 TRIPLE SQUARE (12 POINT) OR 8mm HEX KEY WRENCH

1 - Left Support Bracket 2 - M10 x 25mm Flange Bolt 1- M6 TRIPLE SQUARE (12 POINT) OR 5mm HEX KEY WRENCH

1. Park car on a flat and level surface

capable of supporting the vehicle’s

weight on jack and jack stands.

Using the manufacturer’s

recommended lifting point(s), raise

rear of vehicle and support with jack

stands. NEVER WORK ON A

VEHICLE SUPPORTED ONLY WITH

A JACK!

2. Disconnect end-links from original

anti-roll bar by securing stud with M6

Triple Square or 5mm hex key

wrench and loosening nut with 16mm

wrench.

3. Remove four bushing clamp

mounting bolts using a M10 Triple

Square or 8mm hex key wrench.

Now remove original anti-roll bar

from vehicle. NOTE: To access

upper clamp bolts, suspension must

be compressed to raise drive axel.

4. Install Nutsert into this hole (see

separate instructions for Nutserts).

5. Installing Nutsert, hold tool body with

9/16” wrench from turning and push

down on rachet while crimping

Nutsert into hole.

6. Loosly mount Left and Right support

Brackets, do not tighten at this time.

7. Apply silicone grease to the inside of

supplied bushings and install on the

inside of stop washer on NEUSPEED

anti-roll bar.

8. Install NEUSPEED anti-roll bar using

original clamps and bolts to sub-

frame. Torque bolts to 20Nm (15 ft-

lbs). NOTE: Evenly tighten bushing

clamp bolts and sub-frame support

bracket nuts and bolts.

1 2

Résumé du contenu

Page 1

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX Visit us on the web…http://www.neuspeed.com 28mm RACE SERIES T

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX Visit us on the web…http://www.neuspeed.com 9. Attach en

Commentaires sur ces manuels

Pas de commentaire

Neuspeed 25.02.28.3 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Neuspeed 25.02.28.3. Neuspeed 25.02.28.3 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Neuspeed 25.02.28.3